Gabatar da babban ingancin mu na Top Feeding Jet Mills, gami da EX-proof type jet Mills da Screw feeding jet Mills, wanda Changzhou General Equipment Technology Co., Ltd ya tsara. masana'antu. Tare da sababbin siffofi irin su zane-zane na abinci na sama, waɗannan jet Mills suna ba da ingantaccen samarwa da kuma rage yawan ƙarfin aiki.The Top Ciyar da Fluid gado Jet Mill tabbatar da santsi kayan kwarara, yayin da EX-hujja irin jet niƙa samar da wani hadari yanayin aiki ga maras tabbas kayan. . The Screw ciyar jet niƙa yana ba da damar ciyar da kayan cikin sauƙi, yana haɓaka yawan aiki gabaɗaya. Bugu da ƙari, Babban Ciyar da Ruwan Jiki Jet Mill da Screw Feeding Mill an haɗa su tare da fasali kamar crusher, Magnetic SEPARATOR, da rufaffiyar jakar buɗaɗa don kawar da abubuwa na waje da ƙura, haɓaka yanayin aiki da rage farashin samarwa.Changzhou General Equipment Technology Co., Ltd. , Ltd. ya yi fice don ƙirar ƙirar sa, mai sauƙin aiki, da ingantaccen aiki a cikin samar da manyan injinan jet ɗin ciyarwa. Amince da gwanintar mu da hanyoyin jagorancin masana'antu don haɓaka aikin masana'antar ku.

DTL -1 ton kunshin tashar ciyarwa na musamman don manyan jakunkuna (i.e ton na jakunkuna) lokacin da ƙura ta zube, ƙura da sauran batutuwa da sauran batutuwan da aka haɓaka da kuma tsara ciyarwa, kayan aikin kwashe kayan aiki. Tashar ciyar da jakar ton ta wurin hawan wutar lantarki zai zama jakar ton zuwa tashar abinci ta kayan aiki kai tsaye a sama, ta hanyar jakar jaka ta wucin gadi a cikin bakin sanwici na kayan aiki, ta jakar jakar ton don hatimin jakar jakar ton don hana zubewar kura, sannan ta hanyar wucin gadi don ton jakar zazzage kayan fitarwa, kuma an haɗa su ta hanyar bugu, na'urar girgiza da sauran kayan taimako sun fi dacewa da kayan da ke cikin jakar ton don kammala aikin zazzagewa. Don tsari na gaba kayan aikin ciyarwa kai tsaye ko don jigilar iskar gas, jigilar karkace da sauran tsarin isar da kaya don aikin kwashewa da ciyarwa.

Siffar:

---

Tashar ciyarwar DTL-2 ta dogara ne akan tashar ciyarwar kunshin DTL -1 dangane da ƙara ƙananan jakunkuna na kayan aikin ciyarwa. Ya dace da magunguna , sinadarai , abinci , kayan batir da sauran masana'antu, ƙananan jakunkuna na kayan da tan na buhunan buhunan kayan buɗaɗɗen buhunan buhunan buhu , bayarwa , sieve da kayan fitarwa. Tons na kwancen jaka daidai yake da aikin DTL -1, ƙananan jakunkuna suna buɗewa saboda rawar tarin ƙura, na iya guje wa ƙurar kayan da ke tashi a ko'ina. Lokacin da kayan ya buɗe kuma ya zubo a cikin tsari na gaba, kawai ana buƙatar buɗaɗɗen buɗaɗɗen hannu kai tsaye a cikin tsarin, kuma ana iya kama kayan ta manyan kayan da abubuwa na waje ta hanyar sieve vibration (allon aminci), don haka tabbatar da cewa barbashi waɗanda ba su da tushe. cika buƙatun an kawar da su.

 

Nau'in Reactor:

---

• Tsarin tashar bude jakar yana da sauƙi da sauƙi don aiki.
• The crusher crushes da agglomerates a lokacin bude jakar tsari don tabbatar da m ci gaba na gaba tsari.
• Mai raba maganadisu na iya cire abubuwa na waje a cikin babban jaka.
• Inganta ingantaccen samarwa da rage ƙarfin aiki.
• Buɗe jakar da aka rufe, kawo ƙarshen ƙura, inganta yanayin aiki, rage farashin samarwa.
• Buɗe jaka, patting, murkushewa, haɓakar haɓakar maganadisu, ƙaƙƙarfan tsari, aiki mai sauƙi.
• Ana iya haɗa shi kai tsaye tare da akwatin safar hannu, hopper, reactor da sauran kayan aiki.
• Zai iya samar da yanayin sarrafa numfashi ko lantarki don gane sa ido na nesa.
• Yanayin aiki masu dacewa: manyan jakunkuna na kayan marufi tare da rashin ruwa mara kyau, sauƙin ɗanɗano da kayan haɓaka.
• Dangane da kayan daban-daban don zaɓar kayan daban-daban kamar carbon karfe, bakin karfe 304, bakin karfe 316, farantin titanium, da sauransu.
• Dangane da bambancin ƙayyadaddun marufi, ƙimar jaka da halayen kayan aiki, bisa ga buƙatar abokin ciniki don ƙira dalla-dalla.

 

Aikace-aikace:

---

Yafi zartar da barbashi , powdered kayan na ton na jaka unpacking da sauke kayan , irin su abinci albarkatun kasa , sinadaran albarkatun kasa , Pharmaceutical albarkatun kasa , roba masana'antu , makamashi baturi , coatings masana'antu.

 

Bayani:

---

Samfura	Ƙarfin Ƙarfi (kw)	Saurin saukewa (t/h)	Rotary Valve Power (kw)	Tsayi (m)	Kayan abu
Farashin DTL-1	3	1-4	0.75-1.5	4-15	Karfe Karfe, SUS 304, SUS 316L

 

Cikakkun bayanai:

---

Tashar ciyarwa ta DTL-2 ta Changzhou General Equipment Technology Co., Ltd. tana ɗaukar inganci zuwa mataki na gaba, tare da haɗakar da ƙananan kayan aikin ciyar da kayan aikin. Tare da mai da hankali mai ƙarfi akan daidaito da karko, waɗannan ginshiƙan guga an ƙera su don haɓaka aikin aiki da daidaita ayyukan samarwa. Amince GETC don haɓaka ayyukanku tare da fasaha mai ƙima da ingantaccen aiki.