Changzhou General Equipment Technology Co., Ltd e fana ka mefuta e mengata e fapaneng ea li-screw extrusion granulator tsa boleng bo holimo tse loketseng lits'ebetso tse fapaneng liindastering tse joalo ka metsoako ea rabara, li-additives tsa lijo, li-additives tsa polasetiki, li-catalyst, chefo e bolaeang likokoanyana, dae, pigment, lik'hemik'hale tsa letsatsi le letsatsi, meriana, le tse ling. Li-Granulator tsa rona tsa Double Screw Extrusion Granulator le Single Screw Extrusion Granulators li etselitsoe ho ntlafatsa tšebetso ea granulation ka ho thibela ho baka, ho thiba le ho phunya ha thepa ea phofo. Ka li-mill le li-mixer tsa jet ea ho fepa li-screw, u ka thibela ho aroloa ha likarolo ka har'a metsoako ea likarolo tse ngata, ho netefatsa boleng ba lihlahisoa tsa hau tsa ho qetela. Li-mixer tsa rona tse otlolohileng, li-screw mixers, li-scruder tse le 'ngoe, le li-scruders tse peli li na le lisebelisoa tse tsoetseng pele. e ntlafatsang haholo maemo a ts'ebetso ea granulation le lits'ebetso tsa ho latela tse kang ho omisa le ho paka. Ts'ebetso ea granulation e etsoa sebakeng se metsi, ho fokotsa lerole la masimong ka ho feta 90% le ho ntlafatsa thepa ea tlhaho ea lihlahisoa. Bongata ba lihlahisoa tsa granulation bo ntlafetse haholo, bo boloka lipalangoang, polokelo, le sebaka sa ho paka.Khetha Changzhou General Equipment Technology Co., Ltd. bakeng sa tharollo e tšepahalang le e sebetsang ea screw extrusion granulation e fihlelang litlhoko tsa hau tse ikhethileng. Tšepa boitsebelo le boiphihlelo ba rona ba ho fana ka lisebelisoa tsa boleng bo holimo bakeng sa liindasteri tse fapaneng. Ikopanye le rona kajeno ho ithuta haholoanyane ka li-screw extrusion granulator le hore na li ka u tsoela molemo joang ts'ebetsong ea hau ea tlhahiso.

SE letoto la lihlooho tse single- le mafahla-screw extruder e arotsoe ka sekoti se le seng sa extruder (DET) le mafahla-screw extruder (SET). Mokhoa oa extrusion o arotsoe ka ho tsoa ka pele le ho tsoa ka lehlakoreng. Twin-screw extruder e arotsoe ka intermeshing mofuta extruder le karohano mofuta extruder. Khetha screw extruder ka mefuta e fapaneng ea sebopeho ho latela thepa ea thepa, le litlhoko tsa granulation.

E angoa ke matla a extrusion a hlahisoang nakong ea ho tsamaisa screw, lisebelisoa tse metsi tse ntseng li tsoakoa le ho luloa, kapa thepa e nang le ntlha e tlase e nolofatsang (ka kakaretso e ka tlase ho 60 ℃) e ntšoa ho tsoa ho li-apertures tsa formwork hloohong, ho etsa lisebelisoa le likaroloana tsa kholomo e khuts'oane. ka mor'a ho omisoa kapa ho pholile, kahoo ho finyella morero oa ho fetola phofo hore e be likaroloana tse tšoanang. Likaroloana ke cylindrical (kapa likarolo tse khethehileng tse sa tloaelehang). Diameter ea likaroloana e ka fetoloa le ho laoloa ka ho fetola bophara ba sebopeho sa aperture; bophara ba likaroloana tlas'a mahlakoreng a ho tsoa ka mahlakoreng pakeng tsa 0.6 ho ea ho 2.0 mm; bophara ba likaroloana tlas'a mefuta e ka pele ea ho tsoa pakeng tsa 1.0 ho ea ho 12mm; Bolelele ba ho robeha ha tlhaho bo itšetlehile ka matla a ho kopanya thepa, 'me ka kakaretso ke makhetlo a 1.25 ho 2.0 ho feta bophara. Front extrusion e hlokang bolelele bo khethehileng e ka sebelisa mokhoa oa ho itšeha oa kantle. Ka tsela ena, ho ka fumanoa likaroloana tse batlang li tšoana. Maemong a mangata, sekhahla sa granulation se phahame ho feta kapa se lekana le 95%.

Likaroloana:

---

• Ha granulation ea lisebelisoa tsa phofo e phethiloe boemong ba metsi, e ntlafatsa haholo maemo a ts'ebetso ea granulation le ts'ebetso ea ho latela (e kang ho omisa, ho paka, joalo-joalo); Ho fofa ha lerole tšimong hangata ho fokotsehile ka ho feta 90%.• Granulation e ka thibela lihlahisoa tsa phofo hore li se ke tsa kaka, li bridging, le ho loping, 'me tsa thibela tšilafalo ea bobeli e tlisoang ke lisebelisoa tsa phofo, ho ntlafatsa haholo thepa ea lihlahisoa.• Ka kakaretso, bongata bo bongata. ea lihlahisoa tsa granulation e ntlafatsoa haholo, ka hona ho boloka lipalangoang, polokelo le sebaka sa ho paka.• Mabapi le lihlahisoa tse ngata tsa motsoako le lihlahisoa tse kopanyang, granulation ka extruder e ka thibela ho arohana ha likarolo, kahoo e hlile e netefatsa boleng ba lihlahisoa tse kopantsoeng.

Kopo:

---

E sebelisoa haholo ho lihlahisoa tse joalo tse hlokang granulation joalo ka metsoako ea rabara, li-additives tsa lijo, li-additives tsa polasetiki, catalyst, chefo e bolaeang likokoanyana, dyestuff, pigment, lik'hemik'hale tsa letsatsi le letsatsi, indasteri ea meriana, joalo-joalo.

 

Leqephe la Boitsebiso ba Teknoloji

---

DET Series Single Screw Extruder

Mofuta	Screw Dia (mm)	Matla (kw)	Phetohelo (rpm)	Ho feta tekano L×D×H (mm)	Boima (kg)
DET-180	180	11	11-110	1920×800×1430	810
DET-180	200	15	11-110	2000×500×1000	810

 

DET Series Twin Screw Extruder

Mofuta	Screw Dia (mm)	Matla (kw)	Phetohelo (rpm)	Ho feta tekano L×D×H (mm)	Boima (kg)
DET-100	100	7.5	11-110	2000×500×1000	810
DET-140	140	15	11-110	1920×800×1430	810
DET-180	180	22	11-110	3000×870×880	810

 

Lintlha

---

---