Na u hloka tharollo e tšepahalang le e sebetsang ea ho sila bakeng sa litlhoko tsa hau tsa meriana kapa tsa indasteri? U se ke ua sheba hole ho feta Changzhou General Equipment Technology Co., Ltd. Re sebetsa ka ho khetheha ho liloala tsa phini tsa boleng bo holimo, liloala tsa laboratori, liloala tsa phofo, le tse ling, tse etselitsoeng ho fihlela litlhoko tse ngata tse fapaneng tsa ho sila. Litsila tsa rona tsa phini li na le moralo o otlolohileng oa shaft o nang le li-discs tse bilikang le li-pin tse kentsoeng, tse lumellang ho sila ka lebelo le phahameng la lintho tse omeletseng le lintho tse emisitsoeng ka metsi. Ka mefuta e fapaneng ea D50 ea 10-45μm, ho tsoa ha boreleli, bokhoni bo phahameng, le litšenyehelo tse tlase tsa ts'ebetso, mabili a rona a phini ke khetho e nepahetseng bakeng sa ho fihlela boholo bo botle ba likaroloana. Sebopeho se kopaneng le ho qhaqholla ha bonolo ho etsa hore lifela tsa rona e be khetho e bonolo le e sebetsang bakeng sa ts'ebetso ea hau. Tšepa botsebi ba Changzhou General Equipment Technology Co., Ltd. bakeng sa litlhoko tsohle tsa hau tsa ho sila.

Leloala la pin ( leloala la pin, micro pin mill, fine pin mill, pin mill grinding, pin mill Crush, pin mill pulverizer, pin grinding equipment) ke mochini oa ho sila o tsamaisang thepa ka ts'ebetso ea likhoele tse tsamaeang khafetsa. . Joalo ka kichineng blender, e pshatla lintho ka tšusumetso e pheta-phetoang.

Kenyelletso e Khutšoanyane:

---

Leloala ke mofuta oa leloala la vertical shaft impactor mme le na le li-discs tse peli tse bilikang tse nang le lithakhisa tse kentsoeng sefahlehong se le seng.

Li-discs li hlophisitsoe ka tsela e bapileng e le hore lithakhisa tsa disk e 'ngoe li shebane le tse ling. Ntho e lokelang ho etsoa homogenized e fepeloa sebakeng se lipakeng tsa li-disk mme e le 'ngoe kapa li-disk tse peli li potoloha ka lebelo le phahameng.

Litsila tsa phini li ka sebelisoa linthong tse omeletseng le linthong tse emisitsoeng tsa metsi.
meriana, kaha li ka fihlela boholo ba likaroloana tse tlase joalo ka li-micrometer tse 'maloa.

Boitsebiso bo kenngoa ka mokhoa o ts'oanang ka kamoreng ea ho sila ka mokhoa oa ho fepa, o anngoeng ka matla ke disk e potolohang ka lebelo le phahameng.

Ka nako e ts'oanang, e tlas'a matla a fapaneng a fapaneng a kang khohlano, ho kuta le ho thulana pakeng tsa static disc le ring gear ho sila lintho tse bonahalang.

Diski e tsamaeang le static disc e ka kopanngoa ka mefuta e fapaneng ea meralo ho latela tlhaho ea thepa ho fihlela litlhoko tsa ho sila tsa lisebelisoa tse fapaneng.

Likaroloana:

---

• E fumaneha D50:10-45μm.
• Ha ho sieve, ho lahla hamonate, bokhoni bo phahameng le litšenyehelo tse tlaase tsa ts'ebetso.
• Lebelo le phahameng la mohala, boholo bo fokolang ba phatsa.
• Sebopeho se kopaneng le mosebetsi o monyane. bonolo ho qhaqholla le ho hlwekisa
• Matla a tlase a ho kenya, ts'ebeliso e pharaletseng, ts'ebetso e phahameng ea litšenyehelo.
• Metsoako e fapaneng ea ho kenya, e sebetsang litlhoko tse fapaneng tsa ts'ebetso
• Ho sila ho ka har'a sistimi e koetsoeng, lerōle le lerata le tlase, ts'ebetso ea tlhahiso e hloekileng le e se nang tikoloho.
• Sistimi ea taolo ea PLC, ts'ebetso e bonolo.
• Koloi e le 'ngoe kapa habeli, haeba e ntlafalitsoe ho ea ho matla a mabeli, a fihlang ho 200m/s kapa ho feta lebelo la mohala, ho fumana matla a holimo a ho sila.
• Enjene e ka kopanngoa le lebanta ho eketsa lebelo le ho phunyeletsa bothata ba li-motor tse lebelo le holimo ntle le mochine o tsebahalang oa motlakase.
• E ka sebelisoa ka lihlopha tse nang le lihlopha tsa mekhahlelo e mengata ho hlahisa lihlahisoa tse nang le boholo bo bongata ka nako e le 'ngoe.
• Moralo oa boikhethelo o thibelang ho phatloha, o kopana le litlhoko tsa ho sila ka mokhoa o hlakileng oa oxide e ka tukang le e phatlohang.
lisebelisoa
• Mocheso o phahameng, mocheso o tlase, mocheso o tloaelehileng, potoloho e thibelang moea, meralo ea potoloho ea khase e Inert e teng, bakeng sa mefuta e fapaneng.
ditlhoko tsa ho sila tsa disebediswa tse fapaneng.

 Kopo:

---

E sebelisoa haholo lik'hemik'hale, letsoai la inorganic, meriana, lijo, li-pigments, dae, chefo e bolaeang likokoanyana, lisebelisoa tsa betri, liminerale, lisebelisoa tsa refractory le liindasteri tse ling.

 

SPEC:

---

Mohlala	DPM160	DPM260	DPM400	DPM510
Matla a Matla a Matla (kw)	4	11	22	37
Daela Max Speed ​​(rpm)	24000	16000	12000	9000
Palo ea Mela ea ho Daela	3	3	3	3
Size ea Sekhahla sa Prushing D97 (um)	10-500	10-500	10-500	10-500

 

Lintlha

---

 

The Pin Mill ho tsoa ho GETC ke leloala le otlolohileng le otlolohileng la shaft le fetolang lefatše la ho sila ka mochini. Ka li-discs tse peli tse potolohang tse nang le li-pins tse nepahetseng, thepa ena e fana ka ts'ebetso e ke keng ea lekanngoa le ho tšepahala bakeng sa mefuta e fapaneng ea likopo tsa indasteri. Ho sa tsotellehe hore na o sebetsana le lik'hemik'hale, liminerale, kapa lisebelisoa tse ling, mochini oa rona oa pin o fana ka liphello tse tsitsitseng ka ho nepahala le ka mokhoa o tsotehang. litekanyetso. Ka thekenoloji e tsoetseng pele le boqapi bo phahameng, lisebelisoa tsa rona li etselitsoe ho mamella maemo a boima haholo a tlhahiso ha li ntse li fana ka liphetho tsa boleng bo holimo. Tšepa GETC bakeng sa litlhoko tsohle tsa hau tsa ho roala phini 'me u bone phapang ea ts'ebetso le ts'epahalo.